There are several things to consider when comparing Dewalt dws727 and dw717. For some of them, an experienced woodworker would have to decide. Even then, some things are easy to overlook. What matters are the features that serve your use case? These features include speed, ease of use, design, size and price. Before you make a decision, however, do your research. Take a look at this article when making your first choice.
DeWalt DWS727 miter saw is a powerful tool with a corded power supply. It features a compact design that makes it easy to transport and maneuver in tight and tricky spaces.
It features a cam action miter lock for miter setting. That makes it quick and easy to adjust angles from 0-50 degrees left to 0-60 degrees right. A grooving stop brings innovation to the tool. It allows the adjustment of the cutting depth for grooving and rebating applications.
The linear horizontal rails help you attain maximum precision when cutting materials up to 305mm wide. A large dual sliding fence supports significant material cuts at any combination of angles. The quick-release bevel setting is for accurate and simple setting of bevel angles up to 48 degrees for both left and right.
This miter saw comes with an XPS shadow line cut indicator for fast and accurate blade alignment. It illuminates your workpiece for better visibility and productivity. It also features airlock-compatible dust extraction for improved health and safety working space.
- Compact design
- Ease of use
- No dust bag to attach to the radial arm saw.
Dewalt dw717 specializes in crosscutting and miter-cutting jobs. It is fast and effective. Its 15 amp motor generates more power, making it ideal for heavy projects. It makes quick work for jobs that you may have used a table or circular saw to complete. It features a soft start and an electric brake for emergency stops. That makes it an accurate tool.
Its affordability does not compromise its accuracy. It had great features for quick and accurate cuts from baseboards to crown moldings. Adjusting the bevel is easy, and you can adjust the bevel cuts between 0 to 48 degrees to the left and the right.
The miter saw makes several bevel stops possible and makes the adjustment easier. The back fence design allows you to make 45 degrees bevel cuts through dimensional lumber up to 2 by 14 inches. The several bevel stops make finding and setting the bevel angles quick and easy.
It has a 15 amps motor with a no-load speed of 4,000 rpm and features an adjustable stainless steel miter detent plate with 11 positive stops. Adjustments are made easier with a cam-lock miter handle for adjustment (See Patent). Its handy setup gives an increased capacity for big jobs and allows you to flip the saw instead of the material.
It has a big miter capacity, ranging between 0 to 60 degrees to the left and 0 to 52 degrees to the right, making it versatile. A tall sliding fence is for base moldings. It has an innovative clamping mechanism. It is for cutting framing or molding, crosscutting and miter-cutting jobs.
- Big miter capacity
- Innovative clamping mechanism.
- Taller fences
- Lightweight and compact
- A poor dust collection system
Favourite Features of Dewalt dws727
The miter lock handle and miter latch button allow you to miter your saw to 60° right and 50° left. Start the process by lifting the miter lock handle, pushing the miter latch button, and then setting the miter angle desired on the miter. Push down on the miter lock handle to lock the miter angle.
Rail Lock Knob
The rail lock knob locks the saw head firmly to keep it from sliding on the rails. That is ideal for making cuts or when transporting the saw.
The upper part of the fence is adjustable to provide clearance, allowing the saw to bevel to 49°, both left and right. For adjustments, loosen the fence adjustment knob and slide the fence outward. When adjusting the fence, the saw fence should be close to the blade for maximum workpiece support.
It does not interfere with arm up and down movement. Make sure you tighten the fence adjustment knob. When the tracks of the fences become clogged with sawdust, use a brush or low-pressure air to clear the guide grooves.
Dust extraction system
When vacuuming dry dust that is toxic to health or using a special dust Class M vacuum cleaner, start using this saw unless the dust bag or DeWALT dust extractor is in place. Check and clean the dust bag each time after use. It limits the risk of exposure to the operator of hazardous dust, which exposes the user to an occupational disease (Quirepace.co.uk).
Use the material clamp provided with your saw. The left or right fence helps in clamping. When assembling the clamp on the back side of the saw, set the arm of the clamp at the highest position so that the clamp post slides into the mounting hole as the clamp passes over the fence. Tighten the knob to clamp the workpiece.
Favorite Features of Dewalt dw717
Pre-set mitre latch
This miter saw is ideal for cutting crown molding. To fit, crown molding must be compound mitered with accuracy. Your miter saw has pre-set miter latch points at 22.5°, 31.6°, and 35.3° left and right for cutting crown molding at the proper angle and bevel stop pawls at 22.5° and 30° left and right.
The 15 amps motor is powerful enough to deliver a no-load speed of 4,000 rpm.
This miter saw features an adjustable, stainless steel miter detent plate with 11 positive stops. It helps you quickly make accurate cuts and adjust the miter using the cam-lock miter handle. Its versatility lies in its capacity between 0 to 60 degrees to the left and 0 to 52 degrees to the right.
The miter saw has an innovative clamping mechanism of dual horizontal steel rails and linear bar bearings. These help you attain accuracy and extend the life of your miter saw. It features a tall sliding fence for base moldings.
The fence slides out of the way when making bevel cuts. That keeps the saw compact with the help of dual horizontal steel rails.
The innovative clamping mechanism and linear ball bearings are for accuracy and durability.
- Both have tall sliding fences.
- They use similar clamping systems
- They are lightweight
- Dewalt dw717 is more affordable than dws727.
- Dewalt is ideal for projects which require visibility, unlike the dw717.
What could be better?
- Attaching a dust bag to the radial arm saw would have been helpful.
- The dust collection system could be better.
To summarise the above comparison, choosing between Dewalt dws727 and dw717 is based on the differences that serve your interests. When it comes to various crosscutting and miter-cutting jobs, you might have to pick the Dewalt dw717.
It is also an ideal miter saw for your woodwork that is easy to use, quick and effective. It delivers quick, accurate bevel cuts. For tight and tricky spaces, you may have to use the Dewalt dws727. It is also ideal for workspaces with poor lighting. The XPS shadow line cut indicator illuminates your workpiece and tool. Now you should have your sanding tool in mind.
- The Ultimate Guide to Finding the Best Bench Grinders for Your Workshop - September 29, 2023
- The Ultimate Guide to Choosing the Best Carving Axe: A Comprehensive Analysis - October 15, 2023
- Mastering Sanding Techniques Using a Drill - October 14, 2023