If you are looking for a new band saw, you may be spoiled for choice between the Grizzly bandsaw G0555 vs G0555lx band saw. This brand is trustworthy and reliable. It is ideal for professional woodworkers and do-it-yourselfers. The differences separate the two bandsaws. The differences are in cost, weight, and speed. Do not miss the unique features of both band saws, which are explained below.
Overview of the Grizzly bandsaw G0555
It is a bandsaw with a deep throat depth of 13-1/2 inches. It cuts both wood and metal. The heavy-duty bandsaw has a cutting height of 6inches. It is durable due to the high-quality cast iron table. The table tilts 45 degrees to the right and 15 degrees to the left. It has excellent bevelling.
That amounts to a versatile machine that works well on tricky angles. The spacious table measures up to 14 x 14inches. The robust machines have a one-horsepower motor that runs on 11 amps at 110 and 5.5 amps at 220Volts. That means you can connect it to a 110/220Volt power source.
It is a two-variable speed machine that produces 1500fpm and 3200fpm. You can use a 92-1/2inch or 93-1/2inch blade width of 1/8 up to ¾ of an inch. But, the package comes with a 3/8 inch blade. That means you have more control as you can adjust your speeds. The quick-release blade tension helps you to keep the bandsaw machine under control.
- Durable frame.
- Powerful motor.
- Balanced wheels.
- Dual voltage.
- No headlamp.
- The parts need regular alignment.
Key features of the Grizzly g0555 bandsaw
The machine operates at two variable speeds: 1500 fpm and 3200 fpm. That gives you more control over the bandsaw machine as you can adjust it. The quick-release blade tension lever and the fence scale also give you more control. That amounts to precision over cuts.
The Grizzly bandsaw cuts both wood and metal pieces. That tool allows you to cut up to 6 inches in depth. The deep throat depth of 13 ½ inches makes it powerful to cut through metal.
The table is measured at 14 x 14 inches. It is of high-quality cast iron that makes the machine durable. That gives you a bevelling experience. The table tilts 45 degrees to the right and 15 degrees to the left. The angular sawing activities are impressive.
The powerful motor comes with 1horsepower that runs on a dual voltage. You run it at 110Volts on 11 amps or 220Volts on 5.5amps. That is a rare feature of such an affordable tool.
The saw uses two types of blades measuring 92 ½ inches and 93 ½ inches. It is a matter of what works better for you. The width ranges from 1/8inches to ¾ of an inch. Yet, the tool comes with a 3/8 inch blade inside the package.
Overview of the Grizzly G0555lx bandsaw
The G0555lx is a quiet and accurate bandsaw that cuts crosscuts, scrolls and resaw hardwoods. It has minimal vibration and a heavy-duty stand. It has a sturdy T-shape fence design that allows easy attachment and removal of rails. For security reasons, the switch is lockable with a padlock. The cast iron wheels are durable. The quick-blade tension release makes the operation of the bandsaw easy.
The rack and pinion guide post guides and keeps your material sturdy. The ball-bearing blade guides and thrust bearings keep the blade on track. That maintains precise and quality cuts. The heavy-gauge steel stand keeps the bandsaw balanced. The table tilts 45 degrees to the right and 10 degrees to the left. The computer-balanced wheels make the bandsaw innovative.
That gives you less manual work. The 4inch dust port makes the bandsaw effective. The dust horse must be fit to the port and pull the hose, ensuring it does not come off. That means you have a clean environment. The rack and pinion guide post adjustment for upper blade guides keeps your blade sturdy.
- Computer-balanced cast-iron blade wheels.
- Powerful motor.
- Rack and pinion fence.
- Blade alignment bearings could have been better.
Key features of the Grizzly bandsaw g0555lx
Ball-bearing blade guides
The support bearings are behind the blade on the blade guides. They need accurate adjustments for accurate cuts. The blade teeth do not contact the blade guides during cutting. The support bearings are on both the upper and lower blade guide assemblies. They have to be adjusted precisely. Make sure you assemble the bearings whilst the bandsaw machine is off.
Precision Cast-iron table
When adjusting the table, the positive stop bolt allows the table to tilt. When tilting the table, the bolt is lowered and re-adjusted after the table returns 0 degrees. The blade has to be correctly tensioned when tilting the table. It has to be parallel to the blade. Accuracy is achieved by aligning the table to the miter slot.
The fence has to be parallel to the table miter slot and the side of the blade. The tool needed for the fence alignment is the 5mm hex wrench. The fence is installed on the right side of the bandsaw blade. If the fence is not parallel to the miter slot, loosen the cap screws, adjust the fence, and re-tighten the screws.
The g0555lx has speeds of 1800 and 3100 FPM. Speed changes by changing the position of the V-belt in different pulley grooves. The type of material you are cutting and the type of blade determines cutting results.
The blade size is the diameter. The blades range from 1/8 to ¾ inch. You must match the size of the bandsaw blade and the specific cuts you will make. The blade’s diameter starts from the blade’s back to the tip of the tooth. Curve cutting and straight cutting are two types of cuts by the bandsaw. Clean the bandsaw blade when it is dirty and replace it when it is no longer sharp.
- They both come with a 1hp motor.
- They have a cast-iron table.
- Both tables tilt up to 45 degrees.
- The blades used by both models are of the same size.
- They both have quick-release blade tension.
- They have speed variance.
Differences between Grizzly g0555 and g0555lx
- The Grizzly bandsaw g0555 produces 1500 and 3200 FPM, whereas the g0555lx produces 1,800 and 3100 FPM.
- The Grizzly g0555 is 220V, whereas the g0555lx is 110V.
- The Grizzly g0555 bandsaw is lighter than the g0555lx.
- The Grizzly 0555 has balanced aluminum blade wheels for vibrations, whereas the g0555lx has computer-balanced cast-iron wheels.
Grizzly bandsaw G0555 ranged on 500, whereas the Grizzly G0555lx is under 800. The Grizzly bandsaw G0555 is a budget bandsaw ideal for home projects.
Verdict on the Grizzly G0555 vs G0555lx
Both Grizzly models are quality band saws on the current market. They have the same type of motor, the same blade size, a cast iron table and a quick blade tensioning feature. However, the Grizzly Go555 is a budget band saw for users on a budget. It is lighter than its competitors. The Grizzly Go555lx is innovative, solid and flexible. The deciding factor in your choice is your needs. The above article answers the question about the best band saw.
- Grain and Sheen: Teak Oil versus Danish Oil Uncovered - January 10, 2024
- The Cherry on Top: Crafting the Perfect Cutting Board - January 9, 2024
- Polyurethane Water-Based vs Oil-Based: Choosing the Right Finish - January 8, 2024