April 12, 2022

Osmo Polyx Oil vs Wood Wax finish

Osmo Polyx oil for wood floors is a wood finish that falls between varnish and a polyurethane finish. It is very durable and fills in the pores and cracks of your wood floor. In addition, it has a very high UV resistance, which ensures your floor stays beautiful even after years of use. However, Polyx oil for wood flooring is also more expensive than other finishes, and while it does last a long time, your floors will need to be recoated about every five years.

Overview of Osmo Polyx oil

Osmo Polyx Oil is a valuable wax manufactured by combining various natural oils and waxes. It is primarily used for interior design purposes and is almost as hard as varnish. People prefer this option because it is easier to repair than other coats. You can easily apply it on another surface without removing the previous finish. You can use it with a rag.

Advantages 

  • Easy to maintain and scratches or dents in the wood.
  • It has a natural smell that is non-toxic.
  • Protects the wood’s interior and exterior. 

Disadvantages

  • Vulnerable to UV rays.

When to use polyx oil

Polyx oil works wonders to keep indoor wooden flooring in good condition. It is easy to maintain, meaning you can easily fix any scratches. 

Overview of wood wax finish

Osmo Wood Wax Finish is famous because of the satin-matte wood finish it can provide over furniture. It is a trendy product because it brings together the main benefits found in oils and waxes. You can expect wood that can resist moisture and dirt when sealed. It is highly durable but maintains a smooth finish. It is straightforward to apply and doesn’t need any primer. You should also be able to use this wax without sanding between coats efficiently.

Advantages

  • Water-resistant.
  • Smooth surface when fully cured.
  • Cost-effective.

Disadvantages

  • Not transparent.

When to use a wood wax finish

Wax is often used when other finishes have already been applied. It will best serve the consumer, and their furniture is a topcoat. It has a complementary nature that adds a protective film to the wood. This barrier will work to seal and keep the wood looking both new and original. It can be used as your only source of wood protection without any pretreatment of the wood. Applying this wax to raw lumber as a bare minimum can provide a primary barrier that works well but can’t compare to modern finishes like varnish and polyurethane. You can use wax for indoor furniture, antiques, woodwork, cabinets, doors, paneling, and accessories. The common denominator in all these items is that they do not need a hard protective coat due to a less harsh indoor environment.

How to apply Osmo wood wax finish

  1. When applying Osmo wood wax finish to small projects, the ideal application tool is a high-quality blend brush. This brush should sufficiently wax spaces like the floor or any interior cladding walls. 
  2. It is essential to make sure that while you work, you are in complete control and are not overlapping any areas, as this can form marks. 
  3. Before application, you need to stir the tin thoroughly. This will help to maintain the constant load for the brush. 
  4. Make sure to dab off any excess before you start. 
  5. Apply a thin first coat in manageable areas working with the grain. You can then remove the surplus with a microfiber cloth and leave it to dry. 
  6. Once the wax is dry, you can take your finishing pad and lightly sand the finished area. 
  7. Apply a second final coat as done with the first. 
  8. Make sure to work in the direction of the grain. 
  9. Once complete, be sure to remove all excess.

How many coats of Osmo poly oil

It is best to apply a maximum of two coats.

Osmo polyx oil durability

Osmo Polyx-Oil is a very durable oil. It is manufactured from a combination of natural vegetable oils and waxes. These are very easy to apply but once applied; they seal the wood pores. This benefit is accompanied by a natural smell that doesn’t smell like off-gas.

Wood wax finish durability

Wax can penetrate the various layers of wood making it a top option to use as a protecting finish. As it is thin and can travel through the layered seepage, you will garner more excellent protection when you use this for protecting floors and furniture. 

The main challenge is vulnerable to harsh weather elements such as heavy water. The durability is therefore not sustainable enough for outdoor furniture. It is not waterproof, but it will reduce exposure to moisture. You should be well protected against any permanent damage resulting from everyday spills in the home. It is durable enough to use as a topcoat. You can place it on bare and untreated wood. It can serve as a standalone finish.

Can you wax over Osmo polyx?

Wax offers good sealing qualities when used as a topcoat. Wax is compatible with Osmo Polyx; therefore, the two will merge when dry. It is possible to use Wax over Osmo Polyx.

Can you wax over Osmo oil?

It is good practice to ensure you clean a piece of wood entirely before you add a new topcoat. If the wood has its prehistoric coating, you will need to combine mineral salts with sanding before adding a fresh coat. Adding wax will help to shine a preexisting coat of Osmo Oil. It can seal over any cracks that may have developed in the oil over time. This measure is a short-term solution for woodworkers. 

Is Osmo polyx any good?

Osmo Polyx offers the user a considerable amount of durability. It has superb sealing qualities that will help guard against everyday spills in the home. It is not well suited for harsher elements such as heavy rain. 

Can you apply Osmo top oil over Polyx?

It is possible to apply Osmo top oil over Polyx, but it is not recommended. This process is not advisable because the surface may not be fully absorbent.

Leave a Reply