Dewalt Dws716xps Vs Dws779 | This Miter Saw Or That One?

Comparing the Dws716xps vs dws779 can be difficult if you do not have enough information about the saws. You get tangled up in their similarities. It also does not help that they are made of the same brand. That’s another potential criterion that goes down the drain. First, the Dws716xps is a 15-amp, double bevel miter saw with a cam lock miter handle. The dws779 has both of these features. There are some important differences that we will discuss in this post. We recommend comparing the design, speed, power, and accuracy. This way, you can find out what best suits your needs. Below is an overview of each miter saw and its advantages and disadvantages.

Overview of the Dewalt DWS716XPS

The Dewalt 12 inch compound miter saw has a powerful 15 Amp motor that produces 3,000 rotations per minute. It is durable and comes with a cutline featuring a LED light system, increasing visibility. The sawing machine is adjustable, and that makes it accurate.

The stainless miter detent plate has 14 positive stops and a cam miter lock system that allows you to run repeatable cuts. The tall sliding fence supports a large stock up to 6-1/2 inch tall. An efficient dust extraction system collects dust produced during the operation.

It is lightweight, and the built-in handle allows you a comfortable experience in carrying the saw. The dual-bevel design makes the saw bevel from 0 to 48 degrees to the left and right sides. The positive stops range from 0 to 50 degrees.

The integrated cutline, LED work light device has an adjustment-free reduced line indication for accuracy and visibility. It features a chrome, steel miter detent plate with 14 high-quality stops and a cam miter lock gadget that gives repeatable accuracy and sturdiness with clean adjustments. A high-performance dirt duct is there for maximum collection. Its lightweight layout and integration offer portability.

Pros

It has a cutline
Quick and accurate
Supports large stock
Durable
Visibility
Efficient

Cons

No laser
Fewer teeth on the carbide blade

Overview of the Dewalt Dws779

The Dewalt DWS779 miter saw is an innovative tool with horizontal steel rails and a clamping system. The linear ball bearings deliver a smooth. The tall sliding fence ensures accuracy when cutting.

It has ten positive stops, which makes it versatile. The miter saw is durable and features a 15 Amp motor producing 3,800 rotations per minute. The back fence cuts to 2 x 16 lumber at 90 degrees and 2 x 12 at 45 degrees.

There is a wider base supporting the miter saw. The bevel scale makes adjustments quick and accurate. It has an innovative gearbox, with the belt-drive design increasing the cutting capacity. It h a precise miter system and machined base fence support. The cam-lock miter handle delivers quick and accurate miter angles.

It has tall sliding fences which support a 6-3/4 inch Base. It bevels 0° – 48° left and right 2-inch x 14 in. dimensional lumber cross cut capacity at 90° and 2-inch x 10 in. dimensional lumber at 45°

Pros

Great clamping system
Durable
Affordable
Wide base
Innovative

Cons

A bit heavy
No laser

Features of Dewalt DWS716XPS

Miter detent plate

The stainless-steel miter detent plate has 14 positive stops that deliver repeatable accuracy and worksite durability.

Sliding fences

Tall sliding fences support crown molding up to 6-5/8 inch nested and base molding up to 6-1/2 inch vertically against the fence.

Design

Its double-bevel design allows the saw to bevel 0° – 48° to the left and right with positive stops at 0°, 22.5°, 33.9°, and 45°.

LED work light

LED work light system provides adjustment-free cut line indication for accuracy and visibility (Dewalt.com). Even if you work in a low light condition, you still have enough lighting for your project.

Dust collection system

The Dewalt DWS716XPS has an additional dust collection funnel. It is close to the blade, allowing more dust to the included dust bag or an attached dust extractor. The saw features highly efficient dust duct concentrated at the cut point for maximum collection. Since dust collection is problematic on miter saws, Dewalt engineers improved the system with the DWS716XPS.

Features of Dewalt dws779

Positive stops

Dewalt dws779 features a stainless steel miter detent plate with ten positive stops.

Fence support and steel rails

The machined base fence support makes the precise miter system. Its dual horizontal steel rails have an innovative clamping mechanism and linear ball bearings, for accuracy and durability.

Dust collection system

It has an efficient dust collection system that captures over 75% of sawdust.

Design and build quality

Dewalt dws779 has a compact and sturdy design, a linear ball bearing system, and an advanced clamping mechanism with dual steel rails for accuracy and precision. The saw design does not require much adjustment.

Positive Depth Stop

One of the most overlooked features of a miter saw is the adjustable depth stop. This feature comes in handy when you need, it and when you know how to use it. When you must make redundant cuts that do not penetrate the wood, engage the adjustable depth.

Flip down the stop, and adjust the socket screw by loosening the wingnut first. That allows you to adjust the cutting depth. When you are ready to make through cuts again, raise the stop. That keeps your adjustment where you want it, and you can flip the stop down to reengage the stop.

What could have been better