March 6, 2022

Baileigh DEM-2720 CNC Desktop Engraver 110V 27 x 20 inches

The DEM-2720 desktop CNC engraver comes with the software. It has tooling that is sometimes not included with competing tables that cost more. They are built to last. The router arrives fully assembled and runs on 110V power, powerful 200W DC Brushless Motor, up to 20000 Rpm variable spindle speed

It features easy-to-learn design software that you install onto your computer and starts creating patterns. Upload your design file to the table via a USB drive, then use the convenient handheld controller to move the spindle.

Stepper motors move the spindle at a maximum speed of 98.43 inches per minute, and the lead screw X, Y, and Z-axis movement are for accurate positioning. It has ER-11 – 4.0 mm tooling diameters and 4 T-slotted clamps fit on the table to hold the material down for clean cuts.

The CNC router table ships pre-built with alignment for a fast and simple set-up. In an hour or so, you can uncrate the table and get started with the software. It comes fully assembled, thereby reducing work time.

What makes the product durable is the aluminum table that does not buckle under material weight or spindle pressure. The table is delivered pre-built with correct alignment for a fast and simple setup. Within an hour, you are ready to start with the software.

FEATURES

Table Height

The table is 25.5 X 35.5 inches and ideal for sign-makers, and hobbyists. The higher the maximum workpiece height of a laser machine is, the higher the products you can engrave or mark with it. Table height is the distance between the working table and the focus point of the laser beam below the laser head. Measure the products that you wish to engrave or mark.

Compare these dimensions with the table height. Consider the length and width of the working area. Choose a working table that is height-adjustable, so that it covers a wide range of application possibilities. It comes with a laser table.

Worktable

It features a 25.5 X 35.5 inches for sign-makers, and hobbyists. The structurally strong extruded aluminum table will not buckle under material weight or spindle pressure. The table ships are pre-built with correct alignment for fast installation.

The set-up is just an hour to uncrate the table and get started with the software. The work table is spacious and accommodates wide and thick materials. It offers a stable and accurate platform for engraving materials.

Power

The powerful 200 watt DC Brushless motor does not compromise when it comes to efficiency. The machine should be off from the power source before connecting the tool to the power source. Check the voltage and frequency of the power to see if they meet the requirement before you switch on. The allowed range for the voltage is ±5%, and the frequency is ±1%.

Speed variance

It runs up to 20000 rpm. The engraving machine runs on 110v power. The engraving speed and feed, determine the surface finish, power requirements, and material removal rate.

The feed rate is determined by the material, the tool, rigidity of the workpiece, size, and condition of the engraver. It is also influenced by the depth of cut when choosing speed. The maximum speed makes the process quick.

Software

The desktop engraver features easy-to-learn software. Install it onto your computer and start working, upload your design file to the table, use the handheld controller to move the spindle. That makes the machine convenient.

Clamps

It features 4 T-slotted clamps fit on the table to hold the material down for clean cuts. T-Slots and clamps hold the material to the surface and prevent movement during the machining process. The method works if the outside edges are not machined. When using the clamps, place a piece of packing under the jacking bolt to protect the bed of the machine.

SPECIFICATIONS

Cord

The Baileigh machine comes with a cord that allows you to plug the CNC machine from any power source. That way, you do not run out of power. Keep your machine stationary as you move the cord only for power.

You cannot stop working because the battery is flat. The only challenge you can face is working in remote areas with no power. The cord becomes useless.

USB 2.0 Cable

The USB cable allows you to connect your PC to your machine. It is one of the greatest innovations of today in engraving machines. This device allows for data to be compiled, stored, and accessed easily, anytime and anywhere. Users need compatible devices and USB cables are cables. These are used in gathering, transferring, and storing data from one device to another.

Allen Key 2.5 mm

Allen keys help you change  CNC machine parts with ease. The Allen key is a small handheld tool used for driving bolts and screws into the machine. Your work time is reduced due to the time taken assembling the CNC machine. Despite being a small L-shaped piece of metal, the Allen wrench produces an incredible amount of torque. Allen wrenches come in both SAE fractional-inch sizes and metric sizes.

Spindle Speed (RPM)

The speed variance of 20000 rpm allows you to work on any material using the proper speed. That increases performance and limits mistakes and gives you the chance to customize your items. Each material requires a certain speed for accuracy.

Ease of use

The desktop CNC router table ships pre-built with correct alignment for a fast and simple set-up. In an hour, you will be done with the table and get started with the software. That reduces your workpiece.

Uses

  • Etch a surface
  • Carve a design
  • Cut out a shape

Pros

  • Highly efficient
  • Precise
  • Versatile
  • Durable
  • High performance

Cons

  • High energy consumption
  • Overheating

Verdict

Choosing the Baileigh DEM-2720 desktop CNC engraver over other models may be the best decision you can ever make. It is a competitive desktop engraver that seeks to make clean cuts. It works on any material due to speed variance. The aluminum table makes it a durable tool. For starters, it is easier to set up. That minimizes your work time. For sign-makers and hobbyists, that might be the best model.

David D. Hughes
Latest posts by David D. Hughes (see all)

Leave a Reply