March 23, 2022

Epoxy resin woodturning projects

Ten things you can make with Epoxy on a lathe

  1. Craft Resin Coasters
  2. Craft Resin Wall Art
  3. Craft Resin Chopping Boards
  4. Craft Resin Lap Desk
  5. Craft Resin Countertops
  6. Craft Resin Cheese Boards
  7. Craft Resin Ash Tray
  8. Craft Resin Jewelry
  9. Craft Resin Key Chain Charm
  10. Craft Resin Wooden Bowl

Woodturning with resin for beginners

For beginners, it is crucial to understand that there are three different kinds of resin available to use. The main ways in which they differ are the cost and properties used. You should be able to handle many other crafts and DIY projects dealing with epoxy resin. Epoxy resin can be defined as a liquid adhesive that gives a shiny finish. Once dry, it is powerful and difficult to break off, so many people use it to create plastics and paints. Resin can function in the same way that a primer does. This means it provides a good coating for the floors and top surfaces. It can also work well as a sealer.

The main difference between resin and epoxy resin is the time it takes to dry. Resin requires mixing and will take almost half a day to dry. This 12-hour drying time is much higher than what you get from Epoxy, which will be dry in half an hour at max. Epoxy is often more practical because of its ability to harden faster. It is, for this reason, more prevalent in home-based crafts and DIY projects.

Best epoxy resin for woodturning

EcoPoxy FlowCast Kit Clear Casting Epoxy Resin

EcoPoxy FlowCast is popular because it can work well with several different pigments. You can successfully handle metallic, color, or glitter when using this product. It works wonders for any custom tints you wish to exhibit in your woodturning project. Many amateurs suffer from depressions and voids being created while they work. EcoPoxy Flowcast is designed to offer self-leveling, which makes it straightforward to apply on a surface. With this ability, you can easily use this product on spherical surfaces or corners. The Epoxy provides a shiny finish that looks crystal clear. It appears as ‘liquid glass’ and can seal beautiful art projects. Its Eco-Friendly design is biological and can be used on most surfaces.

Epoxy resin for woodturning

Low or medium viscosity is the appropriate epoxy resin required to handle wood successfully. This term is used to refer to the thickness of the liquid. This viscosity level will mean the glue is not too intense and creates a nice even coating layer. The result will be very manageable and not too sticky or tacky. Another advantage of using this is you can easily avoid blushing. 

This problem typically occurs when resin gets a film on the top, which, when drying, stays and leaves an unpleasant appearance. Blushing can also cause problems for the consumer by reducing the hardness of the coating. This can result in the layer peeling or cracking more easily. If you intend to fill gaps with epoxy resin, make sure you make the solution thick enough to hold any repairs constant. Make sure to give the Epoxy sufficient time to dry.

Turning epoxy resin on a lathe

Lathe speed is most important to focus on when turning resin on a wood lathe. This, combined with the level of tool pressure you apply, will significantly affect your result. You need to consider the amount of force you use to the resin. If you add an excessive amount of wax, you can melt it. The opposite is also true in that if you turn too slowly, you will cut the resin unevenly. You may accidentally end up cutting chunks off the polish of your project. 

If you are an amateur woodturner, it is best to make your first project from scrap. Try not to invest too heavily in it because it may turn out low-quality. It is best to be patient and try new techniques to get better.

Using Epoxy for bowl making

To make an epoxy resin bowl, you will need a fragile amount of Resin and Hardener, held in a small cup. You can use different mugs, but it’s best to go with a paper cup. Once you mix these ingredients, you need to fill the gaps with Epoxy. Carefully use duct tape to make the mixture take the shape you want. You will need a lot of patience to mold this, and if you get lazy, the epoxy mixture will run flat. You need a good amount of patience to get it right, so do not lose hope. As the gaps become full, you can add more Epoxy as required. You can judge this by eye level, depending on how big the bowl you are making will be.

Can you turn epoxy resin on a lathe?

Can you turn resin on a wood lathe?

It is possible to turn resin on a wood lathe. This is common for DIY projects and relatively easy to do. 

How do you make Epoxy clear after sanding?

Any polishing tool will help make the Epoxy clear after sanding. A buffing wheel is the most advisable option if available.

How do you finish Epoxy?

When you finish the project, you add a Thin Coat of Epoxy. Then you can sand and seal the Epoxy with Polyurethane Varnish. If you wish to make it clear and shiny, then sand and polish.

Can you use epoxy resin on wood?

Can you use Epoxy instead of polyurethane?

Polyurethane is not as hard and brittle as Epoxy; therefore, it works better. Epoxy is not as flexible and elastic; therefore, it is less resistant to scratches. 

Which is better: polyurethane or Epoxy?

Both of these are handy options, but polyurethane can withstand a higher level of damage.

What is stronger, Epoxy or polyurethane?

Polyurethane is stronger than Epoxy. 

Latest posts by Kenneth (see all)

Leave a Reply