Dws713 vs dws715 | Key Differences: A comparison of the features and capabilities of the miter saws

Since the Dewalt dws713 and dws715 are from the same brand, choosing one can be challenging. These miter saws are popular among professionals and DIY enthusiasts, but they have some key differences that may make one a better fit for your needs. In this post, we’ll go over each saw’s features, capabilities, and performance, as well as their pros and cons, to help you make an informed decision on which one is right for you. Whether you’re a contractor looking for a reliable saw for your jobsite, or a woodworking enthusiast looking for a saw for your workshop, this comparison will give you the information you need to make an informed decision. 

Overview the Dewalt dws713

Dewalt DWS713 is a single-bevel, compound miter saw with easy adjustments, making every movement quick and smooth. The 10-inch Compound Miter Saw has a 15 Amp motor that delivers 5,000 rpm for extended power and durability. 

It features a stainless-steel miter detent plate and turn knob lock for accuracy and durability with easy adjustments. Its tall sliding fences support 4-1/2-inch crown molding vertically nested. The lightweight design and built-in carry handle allow for great portabilityWorking with this saw will not take a lot of time.

The miter plate has 14 preset stops at angles, supporting repetitive cuts and minimizing guesswork and adjustments. This miter saw offers compact dimensions and weighs 56 pounds, allowing you to carry it even with one hand. DWS713 goes with a carry handle, supporting portability. 

This DeWalt tool is for those whose job requires constant travel. Its compact dimensions are for small workshops. DWS713 features an easy-to-read scale on the miter plate, offering accuracy. This visibility supports precise cuts at any single angle.

Pros

• Lightweight
• Powerful
• Accuracy
• Adjustability
• Ease of use

Cons

• No sliding system 
• Heavy and bulky

Overview of the Dewalt DWS715

The 12-inch Single-Bevel Compound Miter saw is powered by a 15 Amp motor. It runs at 4,000 rpm, delivering extended power and durability. It features a stainless-steel miter detent plate and cam miter lock with accuracy, and durability with easy adjustments. 

Its tall sliding fences support 5-1/2-inch base molding vertically and 5-1/2-inch crown molding vertically nested. Its lightweight design and built-in carry handle make it portable. The tool is sturdy and the spring action to return the saw blade to the upright position is slow and smooth. It only leans to the right. 

If you do a lot of trim molding, you might need a dual-bevel saw that can lean in both directions. That way, you do not have to flip the workpiece over when changing the angle direction of the bevel cut. Most miter saws are single-bevel, but they can still cut any crown and trim molding with this type. 

Its pivoting blade can also be tilted in many applications, allowing users to perform a variety of cuts. It makes bevel, angle, and compound cuts using a single power tool. Its sliding fence can be adjusted and perform well when cutting. It ensures that there is no lateral movement of the workpieces.

Pros

• Value for money 
• Accurate
• Taller fence
• Affordable 
• Quick

Cons

• Low-quality dust collection
• No laser

Features of the dws713

Power and speed

It has a 15 amp motor, providing more power in every cut. It allows you to make a clean cut and leave a fine finish. It runs at a speed of up to 5,000 rpm, making quicker and sharper cuts. The saw’s power and speed allow you to handle multiple tasks, even dealing with the hardest wood.

Stops

There are preset stops for quick adjustments. You can stop at any angle with simple movements. The locking knob is strong, maintaining stability for straight cuts.

Base

The base is 100% metal, except for the blade guard and handles.

Sliding system

The innovative sliding system is for smoother and larger cuts. If you are unfamiliar with this design, leading to inaccuracy (Makita.co.za).

Features of Dewalt DWS715

Cutting capacity

This Dewalt 12-inch miter saw can crosscut, miter cut, bevel cut, and compound cut. The tall fence can cut vertical baseboards up to 6-1/2 inches tall, making it ideal for baseboards, trim molding, and crown molding.

At a 45-degree angle miter cut, you can slice through a 2″ x 6″ board in a single pass, making it a saw for framers and deck builders. The capacity of this miter saw makes it ideal for any DIY project, construction job, or trim molding project. 

Power

It features a 15 amp 4,000 rpm motor, which can handle both softwoods and hardwoods and a 15 amp 4,000 rpm motor, which can handle both softwoods and hardwoods. The motor is corded, with a 6 ft cord allowing you to connect the saw motor to a power socket with a 120V voltage supply.

Blade

It features a large 12 inches diameter blade, and you can crosscut 90 degrees through a 2″ x 8″ board in a single cut. It handles a dimensional 4×4 with ease.

Dust collection port

The dust collection port on this saw is typical of standard miter saws. It does not catch much dust. If you add a shop vac, you can gather a larger percentage. Attaching a dust evacuation system is a better way to collect dust.

What could have been better 

Dws715

• A better quality dust collection performs better.
• A laser brings more accuracy.

Dws713

• The cutting capacity could have been better since this saw can only handle small materials, making it difficult to deal with complex work. 
• The built-in dust bag could have been better since there is more dust on the table than in the bag. You can solve this problem by installing a vacuum via a universal adapter.

Similarities

• Both are small Dewalt tools.
• They use a 15amp motor.
• These are single compound miter saws.

Differences between DeWalt DWS713 and DeWalt DWS715 miter saw

• The DeWalt DWS713 is a 10-inch miter saw while the DeWalt DWS715 has a 12-inch blade. 
• The DWS713 is smaller than the Dws715 and the blade spins faster.
• The DWS713 has a no-load speed of 5,000 RPM while the DWS715 has a no-load speed of 4,000 RPM.
• The DeWalt DWS713 weighs 31 lbs., which is 5 lbs. lighter than the DeWalt DWS715.
• The DeWalt DWS715 can cut wider wood boards than the DWS713.

The verdict 

In summation, more differences separate the above tools. If you are working on harder materials and bigger projects, you may have to use the Dewalt dws715. The Dewalt DWS713 is an ideal choice for new users due to its affordable price and preciseness. You may have your top pick now that matches your needs.