Door latch doesn’t line up with the strike plate
Door latch not aligned with strike plate Does your door latch not align with the strike plate? It may have lowered into the opening and no longer fit into the door hole known as the strike plate recess. It can be frustrating when the door latch does not fit into the strike plate with a…
Fein vacuum VS Festool
Fein and Festool are two competing shop vacuums. Choosing one between the two can be difficult. However, it depends on your budget and needs. Woodworking creates a lot of sawdust; you need a dust extractor that deals away with the sawdust can quickly in your workshop. Below is an overview of each brand and its…
Food-safe wood dye
If you are coloring wood that will come in contact with food or beverages, you must use a food-safe wood dye that is safe and odorless. The right dye can not only improve the appearance of the wood but also make it safe for long-term use. Food safe wood paint has many uses, including furniture,…
How to install strike plate on door frame
To install the strike plate on your door frame, mark the strike plate location where the lock bolt hits the jamb, drive nail heads in the scribed area using a nail set and drill a hole on the cross mark. Make the mortise for the strike plate using the chisel and screw the strike plate…
How to thin water-based polyurethane for spraying
Have you ever wondered how you can thin polyurethane for spraying? Look no more, as this article will take you through the process. Thinning polyurethane helps you to get an even and smooth finish. The polyurethane in spray cans does not need thinning because it is as thin as possible. However, if the polyurethane does…
How to use chalk paint on wood
Using chalk paint is not a walk in the park unless you are well-informed. If you do not have enough equipment to use, you may end up having the worst surface. Chalk paint gives the wood a distressed, vintage look with minimal preparation. Use a brush or roller, depending on what works better for you….
Should Pressure-Treated Wood Be Painted
Yes, but pressure-treated wood needs time to dry before painting. Expect 3-4 months before the moisture levels go down. Painting pressure-treated wood with the wrong materials gives you a peeling paint disaster under the best circumstances. Understand the properties and treatments of pressure-treated wood to make an informed decision. This article will take you through…
Tung Oil for Hardwood floors
Tung oil is suitable for finishing hardwood floors due to its natural, durable, and low-maintenance properties. It has multiple advantages that may work better for your project. Consider your needs and the type of wood you are working on before you apply the oil. This article will explain further what tung oil is, what it…